How to check if the bowler is throwing instead of bowling in cricket?


If we say the bowler is literally throwing the ball for example like this:

Source: ESPNCrickinfo

then the umpire shall declare it as a No-ball imminently.

If we say the bowler bowls throw balls in bowling action. That means he is running and performing the same action as bowling like this:

Source: Wikipedia

but not bowling properly (i.e. still throwing the ball), then if umpires catch such action during the match (that is totally up to them) they can call it a no-ball immediately. However, even if they don't catch such illegal bowling actions, the report for the illegal bowling actions is generated by match officials. If any illegal action found they submit the report the the relevant team manager. And process further. You can check the full procedure on Illegal Bowling Actions...

0 0

If you or someone you know has a dslr and a tripod, you can calculate your bowling speed with decent accuracy, better than the ‘stopwatch to record time and divide 22 yards by the time recorded' The former method can give you instantaneous speed which is how it is reported, unlike the latter, which gives the average speed.

Place the dslr on a tripod such that it is facing the pitch from the side and is able to capture the pitch in a single frame. The camera should point in a direction perpendicular to the length of the pitch. Keeping it exactly midway between the stumps would be more preferable. Now just have someone click photographs once you release the ball, in burst mode and with different shutter speeds every time. If the shutter speed is low enough you will be able to see a motion blur of the ball in a single photograph and at different time instants as the ball travels to the other end. Check the distance between the start and end of the blur and divide it by the...

0 0

Bowl with a stiff arm. This enables the ball to be propelled at a faster rate than in baseball, in which the arm is bent. The bowler must release the ball before stepping over the "crease," a line roughly 1 yard from the wickets at either end. The bowler typically will run to the crease in a premeasured run-up and bowl the ball at the batsman while maintaining a stiff arm. Bowlers attempt to bowl the ball faster and faster in order to increase the chance of slipping it past the defending batsman at the other end of the pitch. There are different ways in which to accomplish increased speeds, and the one that a bowler chooses will depend on the circumstances.

Be fast. The fast bowler has the advantage of using speed and spin to her advantage. First, a bowler should work out often and strengthen shoulders and arms in order to bowl faster. A bowler is not considered a fast bowler unless she consistently bowls upwards of 145 km/h, or 93 mph deliveries.

Take a longer...

0 0

Selecting a proper bowling techniques and methods when one thinks of bowling is absolutely crucial not just for the success during this game, but additionally for you personally cognitive development along with physical balance. Learning properly of holding the ball, the balanced position, proper etiquette, discipline and rule are surely many of the minimal criteria you need to fulfill, if you need to master this game.

how to be a better bowler on cricket

" data-medium-file="" data-large-file="" src="" width="300" height="169"...
0 0

In the sport of cricket, throwing, commonly referred to as chucking, is an illegal bowling action which occurs when a bowler straightens the bowling arm when delivering the ball. The laws of cricket specify that a bowler's arm must not extend during the bowling action. Only the rotation of the shoulder can be used to impart velocity to the ball. Throws are not allowed. If the umpire deems that the ball has been thrown, he will call a no ball which means the batsman cannot be given out from that delivery. Current regulations of the International Cricket Council (ICC) set the legal limit of 15 degrees of permissible straightening of the elbow joint for all bowlers in international cricket. This law applies between the point at which the bowling arm passes above shoulder height and the point at which the ball is released. The limit is to allow some natural flexing of the elbow joint which happens during the course of legal delivery.

The charge of 'throwing' against a bowler is...

0 0

In Cricket,is the action of propelling the ball toward the wicket,the bowler mainly do it to take wicket or stop the


from scoring.A person which is skilled with bowling or mainly does bowling is called a bowler and a bowler who is also a


is a



There are different types of bowlers ranging from fast bowlers, whose primary weapon is pace, through swing and seam bowlers who try to make the ball deviate in its course through the air or when it bounces, to slow bowlers, who will attempt to deceive the batsmen with a variety of flight and spin. A spin bowler usually delivers the ball quite slowly and puts spin on the ball causing it to bounce at an angle off the pitch.

If a bowler's foot steps infront of the bowling crease line during the run-up or whenever the player is about to bowl the ball and hasn't been thrown then its no-ball and gives a extra run to the other team and gives them a free-hit in the next-ball and they...

0 0

As a fast bowler, I'd definitely stress the importance of getting your fielders set for catches, as the majority of wickets I've taken are from catches, although very rarely in slips, that's why I never bother with them. Try and keep the ball on or outside the off stump, that means you can concentrate most of your fielders on the off side.

So my fields are generally thus:

Mid On

Mid Off

Fine Leg

Mid Wicket

Point and or Gully

Deep Backward Point


Extra Cover

In an over I would bowl, for example, (depending on what the batsman likes, or doesn't like, sometimes I play into their strengths to get them to play shots)
1, Leg cutter normal length, or "A" on your pad on off stump or just outside
2, Outswing normal length, or "A" on your pad on off stump or just outside
3, Outswing yorker (or full length) right on the stumps, "Y" on pad. Tons of LBWs that way, but you have to take into account...

0 0

Cricket is considered to be a gentleman’s game that has a class in itself. The game of cricket has elements like batting, bowling and fielding and all of these elements has an equal importance. Bowling is considered to be important part of cricket that brings the ball in to the game at the great speed. The game of Cricket has seen some the fastest bowlers and all those bowlers put a lot of effort in generating that much speed of the ball. Shoaib Akhtar, Brett lee , Coutney Walsh and many others had been the fastest bowlers of all time. The question comes that how is the bowling speed measured in cricket when the bowlers bowl at such a fast speed. There are two methods by which a bowling speed is usually measured in the cricket.

How Is the Bowling Speed Measured in Cricket

Radar Gun

Measuring the speed of the bowl by a radar is similar to measuring the speed of the moving car. This gun consists of both a receiver and a transmitter. The way it works...

0 0

A few weeks back, I made a post about the Cricket World Cup and some readers said they would have preferred a more detailed piece on the basics of the sport because, let’s face it, the rules are incredibly confusing for people that don’t know the terminology.

However, this is one of the most popular sports in the world and, if America gives it a chance, you will see why. Therefore, here is a very beginner-friendly explanation of cricket, along with some player names and reference materials that every potential fan should know of.

The ground:

Cricket is ideally played on a circular or oval grassy field, referred to as the ground. In the middle of each field, there is a rectangular patch of hard land called the pitch. Surrounding the perimeter of the field is a rope or fence, referred to as the boundary.

The positions/roles/players:

In cricket, there are essentially three roles to be taken care of: the batting, the bowling and the...

0 0

Though placed in point of order second to Fielding, I must be allowed to qualify somewhat the observations before made upon the relative importance of the two.

In giving Fielding the first place, I looked at the game as it is, and not as it might be.

Of course if you will get bowlers so accurate that every ball should be straight to the wicket, and pitched directly in the manner most difficult to play, then the field might become a subordinate part; but even against bowling such as this a batsman with no fear of the field before his eyes might knock up a very pretty score before finally disposed of.

Moreover, very few men can go on bowling their best when chances from the bat are not taken, or when runs are thrown away through bad fielding.

Even the best bowlers must miss the wicket sometimes, and if the wicket-keeper is a muff, and long-stop incompetent, the runs from byes quickly assume formidable dimensions.

The bowling of the present day is of...

0 0

PowerPoint Presentation:


PowerPoint Presentation:

Fast bowling Seam bowling Swing bowling Medium pace bowling Spin bowling Finger spin Off spin Left-arm orthodox Wrist spin Leg spin Left-arm unorthodox Bowling Techniques

PowerPoint Presentation:

Full toss / Beamer Fast bowling Bouncer Indipper Inswinger Leg cutter Off cutter Outswinger Reverse Slower ball Yorker Spin bowling Arm ball Chinaman Doosra Flipper Googly Carrom ball Leg break Off break Slider Topspinner Deliveries

PowerPoint Presentation:

Abbreviations Bowling styles are often abbreviated in scorecards Bowling abbreviations Pace bowling RF Right-arm fast RFM Right-arm fast medium RMF Right-arm medium fast RM Right-arm medium LF Left-arm fast LFM Left-arm fast medium LMF Left-arm medium fast LM Left-arm medium Spin bowling OB Off break (right-arm) LB Leg break (right-arm) LBG Leg break googly (right- arm) SLA Slow left-arm orthodox SLC Slow left-arm chinaman...
0 0

The bowler hitches up his trousers, a wry smile on his face, and prepares to bowl. Four or five paces in, past the single stump, left arm vaguely pointing down the wicket, right arm coming over quite a long way from the vertical, and bowls. The batsman at the far end of the wicket scythes the ball into the distance, where spectators duck to avoid it. So far, so ordinary, but those spectators do seem a little unusual. Their clothes for a start: boaters and bowler hats and three piece suits of an old-fashioned cut. Clouds of tobacco smoke waft overhead from a cluster of pipes.

The fact is that we’re watching footage of perhaps the first sporting controversy ever filmed – a sequence of the bowling method of Arthur Mold. The batsman swinging so mightily last played test cricket 120 years ago. And the bowler hasn’t been seen in action for 104 years. The sequence is one of a number of hidden gems in the 800 rolls of ancient film uncovered in the basement of a shop in Blackburn,...

0 0